Portable USB 13.56mHz NFC IC Card Card Reader Plug and Play ISO/IEC 14443A

Description

Notice: item only read the card. cannot write data.
Chip Type
Serial number
8H10D Reader Output
MF1 Classic S50,S70,FM1108,MF Plus 4bit
87:80:72:99
2574418055
Convert to hexadecimal
(
99 72 80 87
)
NTAG213,NTAG215,NTAG216,DESf
**,Ultra***
04:CA:2E:82
:
5D:5A:80
2184104452
Convert to hexadecimal
(82 2E CA 04
)
Non Driver, USB-Human Interface Device Plug and play
Item is a high performance 13.56Mhz RFID smart card reader without driver, reader distance up to 80mm, it's not only simple aspect, but also stable and reliable data. Widely used for RFID Radio Frequency Identification system and project, Such as Automated parking management system, Personal identification, Access controller, Production Access control, etc
Method of installation and use
Connect with computer through USB interface directly, Reader into the self-inspection. And the same time, LED turn into Blue means standby.
Open the output of computer software,such as Notepada word document or Excel sheets.
The mouse in Notepad or WORD document clicking.
Put tag on the top of reader, the software will output a data(card number) of the tag. When reading the tag, LED light change from Blue to green.
Detecting device is connected
Open the Device Manager of computer, If appears Humans Input Device that means Reader has successfully into computer.
Ⅲ Precautions
Do not install the reader on the magnetic objects and metal objects, they will seriously affect the RF signal.
If after reading, the tag is still in the induction zone, the RF reader will not send data and without any hints.
Ⅳ Common problems
Operation without feedback: Please check whether the interface plugged in, whether the tag is a valid or whether another RF tag is within the reading range.
Data error: Please check Whether the mouse is moved, whether the reader is in a critical state and whether the cable length is too long.